72V255LA10PFG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 8KX18 |
| Density | 144 kb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V255LA10PFG8 Overview
FIFO memory chip can be found in the TQFP package.A Surface Mount mounting method is recommended.When the supply voltage is 3.3V there is the possibility of high efficiency.I found that it has 64 terminations in FIFO means.64 pins are used for operation.FIFO design requires a maximum current of 55mA to operate.A voltage of 3.3V should be used for FIFO's maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.In FIFOs , there is a self-contained gadget.This part is equipped with an IC of type OTHER FIFO memory.FIFO memory chips may be operated at very low supply voltages, such as 3V volts.A maximum supply voltage of 3.6V V can be handled by this FIFO memory chip.A total of 64 pins are present on the FIFO memory IC.When the frequency is set to 100MHz it can maintain good accuracy.There is 100MHz FIFO memory IC's maximum value for regular operation.Using this gadget, RETRANSMIT can also be generated.
72V255LA10PFG8 Features
FIFOs category
Frequency at most
72V255LA10PFG8 Applications
There are a lot of Integrated Device Technology (IDT) 72V255LA10PFG8 FIFOs Memory applications.
- High-speed graphics pixel buffer
- Consumer Systems
- Temporary storage elements
- Seismic Data Collection at Extreme Temperatures
- Fabrication Site
- Analog-to-digital converters
- TVs
- Disk Controllers
- Computer networks
- Smart Meter
