72V255LA10TF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 8KX18 |
| Density | 144 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V255LA10TF Overview
You can find FIFO memory chip in package TQFP .Surface Mount is memory IC's recommended mounting method.High efficiency is possible with a supply voltage of 3.3V .FIFO means contains a total of 64 terminations.There are 64 pins for operation.FIFO requires a minimum of 55mA current to operate.When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.It is self-contained in FIFOs .This part is equipped with an IC of type OTHER FIFO memory.If the supply voltage is very low, such as 3V V, FIFO may be able to operate.An input voltage of 3.6V V is the maximum that FIFO memory can handle.As a result, it contains a total of 64 pins.With a frequency of 100MHz , it maintains good accuracy.During normal operation, the FIFO memory's maximum value is 100MHz .It is also possible to generate RETRANSMIT by using this FIFO memory.
72V255LA10TF Features
FIFOs category
Frequency at most
72V255LA10TF Applications
There are a lot of Integrated Device Technology (IDT) 72V255LA10TF FIFOs Memory applications.
- GPS Offender Tracking
- HDD
- Magnetic memories
- SPI Bus Flash Memory Devices
- Multimedia
- Optical memories
- Data
- Battery Charger
- Extended product-change notification
- Buses
