72V273L7-5PFGI8
| Parameters | |
|---|---|
| Access Time | 5 ns |
| Organization | 16KX18 |
| Density | 288 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Packaging | Tape & Reel |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 133.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 80 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 133.3MHz |
72V273L7-5PFGI8 Overview
FIFO memory chip can be found in the TQFP package.It comes in a Tape & Reel package.Mounting it Surface Mount is recommended.It is possible to achieve high efficiency with a supply voltage of 3.3V .The number of terminations in FIFO means is 80 .FIFO design has 80 operation pins.In order for FIFO design to operate, a maximum current of 35mA is required.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.FIFO operates at a minimum temperature of -40°C degrees Celsius to ensure reliabilFIFOy.The stable operation is enabled by the memory logic's maximum operating temperature of 85°C °C.A self-contained gadget is contained in FIFOs .This part is equipped with an IC of type OTHER FIFO memory.If the supply voltage is very low, such as 3.15V V, FIFO may be able to operate.A maximum voltage of 3.45V volts can be applied to FIFO memory.Approximately 80 pins are attached to it.In the presence of a 133.3MHz frequency, it can maintain good accuracy.There is 133.3MHz FIFO memory IC's maximum value for regular operation.
72V273L7-5PFGI8 Features
FIFOs category
Frequency at most
72V273L7-5PFGI8 Applications
There are a lot of Integrated Device Technology (IDT) 72V273L7-5PFGI8 FIFOs Memory applications.
- Temporary storage elements
- One assembly
- SPI Bus Flash Memory Device
- Computer networks
- Alarm System
- IP Radio
- IP Camera Buffer
- Consumer Systems
- Laser Receiver System
- Rate buffers
