72V283L7-5PF8
| Parameters | |
|---|---|
| Package / Case | TQFP |
| Number of Pins | 80 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO BE CONFIGURED AS 64K X 9; ASYNCHRONOUS MODE IS ALSO POSSIBLE |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 80 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Operating Mode | SYNCHRONOUS |
| Max Supply Current | 35mA |
| Frequency (Max) | 133.3MHz |
| Access Time | 5 ns |
| Organization | 32KX18 |
| Standby Current-Max | 0.015A |
| Memory Density | 589824 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
72V283L7-5PF8 Overview
FIFO memory chip is contained in the TQFP package.Mounting it Surface Mount is recommended.When the supply voltage is 3.3V there is the possibility of high efficiency.FIFO consists of 80 terminations, which indicates that FIFO means is empty.80 pins are the operation pins.In order to operate it, it requires 35mA volts of current.When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.A self-contained gadget is contained within FIFOs .In this part, the memory type is OTHER FIFO .FIFO memory chips may be operated at very low supply voltages, such as 3.15V volts.The FIFO memory chip is capable of handling maximum supply voltages of 3.45V volts.Currently, it has 80 pins.There is 133.3MHz FIFO memory IC's maximum value for regular operation.This gadget can also generate IT CAN ALSO BE CONFIGURED AS 64K X 9; ASYNCHRONOUS MODE IS ALSO POSSIBLE .
72V283L7-5PF8 Features
FIFOs category
Frequency at most
72V283L7-5PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V283L7-5PF8 FIFOs Memory applications.
- Address mapping
- Queues for communication systems
- Computers
- Event Recorder
- Magnetic memories
- Programmable Logic Controller
- Video Processing
- MP3 Interface for Automobile
- Digital buffering
- Video time base correction
