72V811L15PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 512X9 |
| Density | 9 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V811L15PF8 Overview
FIFO memory chip is included in the TQFP package.A Surface Mount mounting method is recommended.Supply voltages of 3.3V are capable of achieving high efficiency.FIFO means contains 64 terminations.64 pins are used for operation.In order for FIFO design to operate, a maximum current of 40mA is required.FIFO is recommended that the supply voltage be set to 3.3V for maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.In FIFOs , there is a self-contained gadget.In this part, the memory type is OTHER FIFO .The FIFO memory chip may be operated at very low supply voltages, such as3V volts.There is a maximum supply voltage of 3.6V volts that FIFO memory can handle.The FIFO memory IC is equipped with a total of 64 pins.A frequency of 66.7MHz is sufficient to maintain good accuracy.Normally, the FIFO memory's maximum value is 66.7MHz .
72V811L15PF8 Features
FIFOs category
Frequency at most
72V811L15PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V811L15PF8 FIFOs Memory applications.
- Buses
- Wireless
- Game Controller
- Rate buffers
- HDD
- Video time base correction
- Routers
- Cameras
- Tape controllers
- PC peripheral
