72V821L10PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2005 |
| Part Status | Active |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Frequency | 100MHz |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Density | 18 kb |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V821L10PF8 Overview
The TQFP package contains FIFO memory chip.There is a case Tape & Reel in which it is packaged.Surface Mount is memory IC's recommended mounting method.Operation pins are 64 .In order to operate FIFO design, a maximum current of 40mA is required.A supply voltage of 3.3V is recommended for FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.If the supply voltage is very low, such as 3V V, FIFO may be able to operate.A maximum voltage of 3.6V volts can be applied to FIFO memory.It is capable of maintaining good accuracy with a frequency of 100MHz .Normally, the FIFO memory's maximum value is 100MHz .
72V821L10PF8 Features
Frequency at most
72V821L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V821L10PF8 FIFOs Memory applications.
- Signal processing
- Medical Monitoring Device
- Communications Systems
- Extended product life cycle
- Wireless
- SPI Bus Flash Memory Device
- Data-acquisition systems
- Firmware loaders
- Consumer Systems
- Network switching/routing
