72V841L15PFI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 4KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V841L15PFI Overview
You can find FIFO memory chip in the TQFP package.The recommended mounting way is Surface Mount .If the supply voltage is set to 3.3V , high efficiency can be achieved.I found that it has 64 terminations in FIFO means.64 pin is used for operation.Its maximum operating current is 40mA .When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.It operates at -40°C degrees Celsius to ensure reliability.85°C °C is the memory logic's maximum operating temperature that allows stable operation.It is contained within FIFOs .It has a type OTHER FIFO memory IC.The FIFO memory chip may be operated at very low supply voltages, such as3V volts.A maximum supply voltage of 3.6V V can be handled by this FIFO memory chip.The FIFO memory IC is equipped with a total of 64 pins.When the frequency is set to 66.7MHz , the system can maintain good accuracy.A FIFO memory's maximum value of 66.7MHz can be used for regular operation.
72V841L15PFI Features
FIFOs category
Frequency at most
72V841L15PFI Applications
There are a lot of Integrated Device Technology (IDT) 72V841L15PFI FIFOs Memory applications.
- Alarm System
- Switches
- High-speed disk
- MP3 Interface for Automobile
- Computer networks
- Cardiac Monitoring Device
- Test Equipment
- Buses
- Address mapping
- SPI Bus Flash Memory Devices
