72V851L10PFG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Max Supply Current | 40mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 8KX9 |
| Standby Current-Max | 0.01A |
| Memory Density | 73728 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V851L10PFG8 Overview
This package is included in LQFP .A Surface Mount mounting method is recommended.A supply voltage of 3.3V is capable of producing high efficiency.I found that it has 64 terminations in FIFO means.FIFO design has 64 operation pins.In order to operate FIFO design, a maximum current of 40mA is required.A voltage of 3.3V should be used for FIFO's maximum efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.Its maximum operating temperature of 70°C °C ensures stable operation.There is a self-contained gadget within FIFOs .This part has a memory type of BI-DIRECTIONAL FIFO .There is a possibility that FIFO may operate at a very low supply voltage, such as 3V V.FIFO memory can handle a maximum supply voltage of 3.6V V.The FIFO memory IC has a total of 64 pins.For regular operation, the memory logic's maximum value is 100MHz .
72V851L10PFG8 Features
FIFOs category
Frequency at most
72V851L10PFG8 Applications
There are a lot of Integrated Device Technology (IDT) 72V851L10PFG8 FIFOs Memory applications.
- TVs
- Extended product-change notification
- Laser Receiver System
- Temporary storage elements
- Computer networks
- Event Recorder
- Routers
- Consumer Systems
- Controlled baseline
- Look-up Tables
