74ABT16600DGGRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION; WITH CLOCK ENABLE |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ABT16600 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Circuits | 18-Bit |
| Number of Ports | 2 |
| Number of Bits | 18 |
| Propagation Delay | 4.7 ns |
| Family | ABT |
| Logic Function | Transceiver |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | Universal Bus Transceiver |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| RoHS Status | ROHS3 Compliant |
74ABT16600DGGRG4 Overview
As part of the 56-TFSOP (0.240, 6.10mm Width) package, it is embedded. Tape & Reel (TR) is how it's packaged. A 18-Bit circuit is used for achieving its superior flexibility as a result of its use of 18-Bit circuits. This electrical device has a logic type of Universal Bus Transceiver. It is mounted in the way of Surface Mount so that this electronic part can be seen. The operating temperature should be higher than -40°C~85°C in order for the machine to function properly. Featuring high and low output currents, 32mA 64mA offers maximum design versatility. An FPGA belonging to the 74ABT series is a type of FPGA. With a voltage supply of 4.5V~5.5V, it is able to operate. As it belongs to the 74ABT16600 family, it should be taken into consideration. It is possible to use 56 terminations, which are the ends of a transmission line which should be connected to a device whose characteristic impedance matches that of the transmission line. It is important to keep the supply voltage above 5V for normal operation. This device is equipped with 56 pins. With 18 Bits, you can design electronic parts in a very flexible way. There are a number of termination types, including 2 terminations, which is the term that refers to the practice of terminating a transmission line with a device that matches the characteristic impedance of the line. In this case, the electronic part will be mounted in the Surface Mount-direction. 56 pins are used in its design. Devices in this family are known as ABT devices. When Vsup reaches 5.5V, the maximum supply voltage has been reached. The supply voltage (Vsup) should be greater than 4.5V. WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION; WITH CLOCK ENABLE is one of the characteristics of this type of system as well.
74ABT16600DGGRG4 Features
56-TFSOP (0.240, 6.10mm Width) package
74ABT series
74ABT16600 family
56 pin count
56 pins
74ABT16600DGGRG4 Applications
There are a lot of Texas Instruments 74ABT16600DGGRG4 Universal Bus Functions applications.
- Game console
- Square wave oscillators
- Ship
- Disk read-write IC
- Range hood
- Digital system
- Laptop
- Washing machine
- Television
- Cell phone
