74ABT74DB,112
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ABT74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 250MHz |
| Propagation Delay | 3 ns |
| Quiescent Current | 50μA |
| Turn On Delay Time | 3 ns |
| Family | ABT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 15mA 20mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 4.2ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Power Supply Current-Max (ICC) | 0.05mA |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
74ABT74DB,112 Overview
It is embeded in 14-SSOP (0.209, 5.30mm Width) case. D flip flop is embedded in the Tube package. T flip flop is configured with an output of Differential. It is configured with the trigger Positive Edge. This electronic part is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis used as the supply voltage. -40°C~85°C TAis the operating temperature. Logic flip flops of this type are classified as D-Type. JK flip flop is a part of the 74ABTseries of FPGAs. Its output frequency should not exceed 250MHz. A total of 14terminations have been recorded. It is a member of the 74ABT74 family. An input voltage of 5Vpowers the D latch. There is 3pF input capacitance for this T flip flop. It belongs to the family of electronic devices known as ABT. There is an electronic part mounted in the way of Surface Mount. This board is designed with 14pins on it. A Positive Edgeclock edge trigger is used in this device. The superior flexibility of this product is achieved by using 2 circuits. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. There are 1 output lines on it. As a result, it consumes 50μA of quiescent current without being affected by external factors.
74ABT74DB,112 Features
Tube package
74ABT series
14 pins
74ABT74DB,112 Applications
There are a lot of Nexperia USA Inc. 74ABT74DB,112 Flip Flops applications.
- Communications
- Circuit Design
- Parallel data storage
- Buffered Clock
- Memory
- Pattern generators
- Guaranteed simultaneous switching noise level
- EMI reduction circuitry
- Differential Individual
- Convert a momentary switch to a toggle switch
