74AC174SCX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 2V~6V |
| Frequency | 100MHz |
| Base Part Number | 74AC174 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 7 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 6 |
| Clock Frequency | 125MHz |
| Propagation Delay | 12.5 ns |
| Turn On Delay Time | 6 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 6 |
| Max Frequency | 100MHz |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 4.5pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 3 |
| Number of Output Lines | 6 |
| Clock Edge Trigger Type | Positive Edge |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74AC174SCX Overview
The flip flop is packaged in 16-SOIC (0.154, 3.90mm Width). Package Tape & Reel (TR)embeds it. Currently, the output is configured to use Non-Inverted. The trigger it is configured with uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. A supply voltage of 2V~6V is required for operation. Currently, the operating temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. FPGAs belonging to the 74ACseries contain this type of chip. Its output frequency should not exceed 125MHz. In total, it contains 1 elements. As a result, it consumes 40μA quiescent current and is not affected by external forces. The 74AC174 family contains it. This JK flip flop has a 4.5pFfarad input capacitance. It is mounted in the way of Surface Mount. There are 16pins on it. This device has the clock edge trigger type of Positive Edge. The design is based on 6bits. The superior flexibility of this circuit is achieved by using 7 circuits. It operates with 6 output lines. It is reported that there are 3 input lines. A -24mAvalue is set for the high level output current. It is set to 24mAfor the low level output current. It is recommended that the operating temperature be below 85°C. A temperature above -40°Cshould be used for the operation. It operates with the minimal supply voltage of 2V. There is a maximum supply voltage of 6V. It is possible to achieve 100MHz frequencies.
74AC174SCX Features
Tape & Reel (TR) package
74AC series
16 pins
6 Bits
74AC174SCX Applications
There are a lot of ON Semiconductor 74AC174SCX Flip Flops applications.
- Supports Live Insertion
- Data Synchronizers
- Counters
- Cold spare funcion
- Modulo – n – counter
- Automotive
- Test & Measurement
- Shift Registers
- Individual Asynchronous Resets
- Guaranteed simultaneous switching noise level
