74AC175MTC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74AC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | SMD/SMT |
| Type | D-Type |
| Voltage - Supply | 2V~6V |
| Base Part Number | 74AC175 |
| Function | Master Reset |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 4 |
| Output Current | 24mA |
| Clock Frequency | 244MHz |
| Propagation Delay | 13 ns |
| Turn On Delay Time | 7 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Number of Output Lines | 2 |
| Clock Edge Trigger Type | Positive Edge |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74AC175MTC Overview
The flip flop is packaged in a case of 16-TSSOP (0.173, 4.40mm Width). There is an embedded version in the package Tube. There is a Differentialoutput configured with it. The trigger it is configured with uses Positive Edge. Surface Mountmounts this electrical part. A voltage of 2V~6Vis required for its operation. It is operating at a temperature of -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. In terms of FPGAs, it belongs to the 74AC series. It should not exceed 244MHzin its output frequency. A total of 1elements are present in it. As a result, it consumes 40μA quiescent current and is not affected by external forces. It is a member of the 74AC175 family. JK flip flop input capacitance is 4.5pF farads. This electronic part is mounted in the way of Surface Mount. The 16pins are designed into the board. It has a clock edge trigger type of Positive Edge. In order to achieve its superior flexibility, 4 circuits are used. In addition to its maximum design flexibility, the output current of the T flip flop is 24mA. The JK flip flop is with 2 output lines to operate.
74AC175MTC Features
Tube package
74AC series
16 pins
74AC175MTC Applications
There are a lot of ON Semiconductor 74AC175MTC Flip Flops applications.
- Automotive
- ESCC
- Differential Individual
- Individual Asynchronous Resets
- Reduced system switching noise
- Digital electronics systems
- Common Clocks
- Cold spare funcion
- Functionally equivalent to the MC10/100EL29
- Modulo – n – counter
