74ACT11008PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Subcategory | Gates |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ACT11008 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Propagation Delay | 8 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 9 ns |
| Family | ACT |
| Logic Function | AND |
| Number of Inputs | 2 |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | AND Gate |
| Max Propagation Delay @ V, Max CL | 8ns @ 5V, 50pF |
| Schmitt Trigger | NO |
| Logic Level - Low | 0.8V |
| Logic Level - High | 2V |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74ACT11008PW Overview
Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the part is convenient for international shipping. The advanced packaging method Tube provides high reliability. As a result, it works on the principle of AND Gate. The part must have a voltage of 4.5V~5.5V in order to function properly. Operation at a temperature around -40°C~85°C. In Surface Mount, the part is mounted. In both high and low states, output current is 24mA 24mA. There are several in the 74ACT series. Total terminations are 16. There are 4 features that significantly enhance the user experience. It is part of the ACT family of chips. Try searching with 74ACT11008 if you're looking for device variants. There are 16 pins injected into the part body. The logic device can be mounted on the Surface Mount axis and is used in a wide range of applications. The datasheets for the 16 pins explain the functions. It supports inputs of 2. In the quiescent state, the part has 4μA current flowing through it. Gates is a typical logic device. A load capacitance of 50pF is provided by the part. The datasheet specifies that the part requires 5V volts of power. Its output current is rated at 24mA. In this device, there are 1 outputs. The operation uses 4 elements in total. There is a specified operating supply voltage for the chip of 5V volts.
74ACT11008PW Features
AND Gate Logic Type
Operating Temperature: -40°C~85°C
ACT Family
Quiescent Current: 4μA
Output Current: 24mA
74ACT11008PW Applications
There are a lot of Texas Instruments 74ACT11008PW Gates and Inverters applications.
- Computer
- Washing machine
- Fishery-optical complementary power station
- Air conditioner
- Overcurrent/Short circuit protection
- CD player
- Television
- Cell phone
- Grid adaptation function
- Roof distributed power station
