74ACT11374DWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ACT11374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 70MHz |
| Propagation Delay | 11.3 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 8.5 ns |
| Family | ACT |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 11.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Max Frequency@Nom-Sup | 55000000Hz |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74ACT11374DWR Overview
It is embeded in 24-SOIC (0.295, 7.50mm Width) case. The Tape & Reel (TR)package contains it. Tri-State, Non-Invertedis the output configured for it. It is configured with a trigger that uses a value of Positive Edge. The electronic part is mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. It is at -40°C~85°C TAdegrees Celsius that the system is operating. This D latch has the type D-Type. In this case, it is a type of FPGA belonging to the 74ACT series. A frequency of 70MHzshould be the maximum output frequency. A total of 1elements are present in it. In 24terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. JK flip flop belongs to 74ACT11374 family. A voltage of 5V provides power to the D latch. This T flip flop has a capacitance of 4pF farads at the input. ACTis the family of this D flip flop. The electronic part is mounted in the way of Surface Mount. 24pins are included in its design. This device has Positive Edgeas its clock edge trigger type. The part is included in FF/Latches. The design is based on 8bits. The superior flexibility of this circuit is achieved by using 8 circuits. In light of its reliable performance, this T flip flop is well suited for TR. The D latch operates on 5V volts. The flip flop has 2ports embedded within it. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. With an output current of 24mA, it is possible to design the device in any way you want. It operates with 3 output lines. Quiescent current is consumed by the D latch in the amount of 8μA.
74ACT11374DWR Features
Tape & Reel (TR) package
74ACT series
24 pins
8 Bits
5V power supplies
74ACT11374DWR Applications
There are a lot of Texas Instruments 74ACT11374DWR Flip Flops applications.
- Individual Asynchronous Resets
- Buffer registers
- Shift registers
- ESD protection
- Event Detectors
- CMOS Process
- Functionally equivalent to the MC10/100EL29
- Memory
- Data transfer
- Single Down Count-Control Line
