74AHC138T16-13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 172.98879mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Digi-Reel® |
| Published | 2013 |
| Series | 74AHC |
| JESD-609 Code | e3 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Subcategory | Decoder/Drivers |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 3:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 3 |
| Propagation Delay | 4.4 ns |
| Quiescent Current | 4μA |
| Family | AHC/VHC/H/U/V |
| Logic Function | Decoder, Demultiplexer |
| Current - Output High, Low | 8mA 8mA |
| Supply Type | Single |
| Prop. Delay@Nom-Sup | 9.5 ns |
| Number of Input Lines | 6 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Input Conditioning | STANDARD |
| Length | 5mm |
| Width | 4.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
74AHC138T16-13 Overview
In order to conserve board space, digital switch is included in the 16-TSSOP (0.173, 4.40mm Width).The package is in the form of Digi-Reel?.As far as mounting is concerned, digital switch ic uses Surface Mount.For the analog part of the multiplexers, an IC Decoder/Demultiplexer is used.By maintaining the operating temperature at -40°C~125°C, turn signal switch will not be affected by external factors.Designers have greater flexibility using digital controlled switch when it works with 2V~5.5V voltage.Multiplexers in the 74AHC series are suitable for a wide range of applications.Its basic configuration includes terminations in the 16 range.The multiplexer's system is powered by 5V volts.This turn signal switch has a total of 16 component pins.GULL WING represents the end of conductors.Single is used as its supply type.With 16 pins, it is configured.The mounting point is Surface Mount.The logic switch is a member of the AHC/VHC/H/U/V family.In the signal multiplexer, there are 3 bits available.It is recommended that the minimum supply voltage (Vsup) be kept at 2V to avoid some unnecessary failures.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.Normally, 2/5.5V is powered by a battery.In electronic terms, the digital switch ic is classified as Decoder/Drivers.Despite not interacting with external factors, it consumes 4μA current of multiplexer ic.The switches package is packaged in accordance with the TAPE AND REEL method.The multiplexers have 6 input lines used to accept voltage levels.As the signal source, there are 8 output lines.
74AHC138T16-13 Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2/5.5V
6 input lines
8 output lines
74AHC138T16-13 Applications
There are a lot of Diodes Incorporated 74AHC138T16-13 Signal Switches / Multiplexers / Decoders applications.
- Code conversion
- Enabling block of memory depending on address in memory chips
- Speed control of medern motors
- High-performance memory-decoding applications
- Time division multiplexing system
- CNC machines
- Logic gates for other digital devices
- Microprocessor memory systems
- Microprocessor instruction decoding
- PCIe
