74AHC139PW-Q100J
| Parameters | |
|---|---|
| Current - Output High, Low | 8mA 8mA |
| Supply Type | Single |
| Output Polarity | INVERTED |
| Screening Level | AEC-Q100 |
| Propagation Delay (tpd) | 18.5 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Input Conditioning | STANDARD |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74AHC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Decoder/Demultiplexer |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74AHC139 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 2:4 |
| Supply Voltage-Min (Vsup) | 2V |
| Family | AHC/VHC/H/U/V |
| Logic Function | Decoder, Demultiplexer |
74AHC139PW-Q100J Overview
Digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width) for the purpose of saving board space.Tape & Reel (TR) represents its packaging.In terms of mounting, digital switch ic uses the Surface Mount method .In the multiplexers, the analog IC is indicated by Decoder/Demultiplexer.When the operating temperature is kept at -40°C~125°C, turn signal switch will not be susceptible to external factors.A supply voltage of 2V~5.5V provides digital controlled switch's superior flexibility for designers.Multiplexers from the 74AHC series can be used in a wide range of applications.Among its basic features are 16 terminations.The base part number is 74AHC139, so you can find its logic switch related parts using that number.The turn signal switch is supplied with a voltage of 5V volts.In this turn signal switch, there are 16 component pins.GULL WING represents the end of conductors.There is a type of supply of Single.A configuration of 16 pins is used.Multiplexer ics are mounted in the direction of Surface Mount.Among the family of AHC/VHC/H/U/V the logic switch is a member.It is recommended that the minimum supply voltage (Vsup) be kept at 2V so that unnecessary failures can be prevented.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.
74AHC139PW-Q100J Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
74AHC139PW-Q100J Applications
There are a lot of Nexperia USA Inc. 74AHC139PW-Q100J Signal Switches / Multiplexers / Decoders applications.
- Computer memory
- Transmission from the computer system of a satellite
- A/D converters
- Relay
- Make full adder
- Video transmission
- Speed synchronization of multiple motors in industries
- Automation system
- PCIe
- Robotic vehicles
