74AHC74PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AHC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Output Current | 25mA |
| Clock Frequency | 115MHz |
| Propagation Delay | 3.7 ns |
| Quiescent Current | 2μA |
| Turn On Delay Time | 7.4 ns |
| Family | AHC |
| Logic Function | AND, D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 9.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74AHC74PW,118 Overview
The package is in the form of 14-TSSOP (0.173, 4.40mm Width). D flip flop is included in the Tape & Reel (TR)package. T flip flop is configured with an output of Differential. JK flip flop uses Positive Edgeas the trigger. The electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 2V~5.5V. A temperature of -40°C~125°C TAis used in the operation. The type of this D latch is D-Type. In terms of FPGAs, it belongs to the 74AHC series. It should not exceed 115MHzin terms of its output frequency. There have been 14 terminations. The 74AHC74 family contains it. The power source is powered by 5V. This T flip flop has a capacitance of 3pF farads at the input. Devices in the AHCfamily are electronic devices. There is an electronic part mounted in the way of Surface Mount. Basically, it is designed with a set of 14 pins. It has a clock edge trigger type of Positive Edge. For normal operation, the supply voltage (Vsup) should be above 2V. To achieve this superior flexibility, 2 circuits are used. In order to achieve high efficiency, the supply voltage should be maintained at 5V. With a current output of 25mA , it offers maximum design flexibility. There are 1 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. Quiescent current is consumed by the D latch in the amount of 2μA.
74AHC74PW,118 Features
Tape & Reel (TR) package
74AHC series
14 pins
74AHC74PW,118 Applications
There are a lot of Nexperia USA Inc. 74AHC74PW,118 Flip Flops applications.
- Data storage
- Load Control
- ATE
- Registers
- Count Modes
- Data Synchronizers
- Bounce elimination switch
- Memory
- Individual Asynchronous Resets
- Circuit Design
