74AHCT374D-Q100J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | Automotive, AEC-Q100, 74AHCT |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Function | Standard |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Number of Ports | 2 |
| Clock Frequency | 130MHz |
| Propagation Delay | 10.4 ns |
| Quiescent Current | 4μA |
| Family | AHCT/VHCT/VT |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 10.4ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
74AHCT374D-Q100J Overview
It is packaged in the way of 20-SOIC (0.295, 7.50mm Width). You can find it in the Tape & Reel (TR)package. It is configured with Tri-Stateas an output. The trigger configured with it uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. The operating temperature is -40°C~125°C TA. A flip flop of this type is classified as a D-Type. This type of FPGA is a part of the Automotive, AEC-Q100, 74AHCT series. This D flip flop should not have a frequency greater than 130MHz. The list contains 1 elements. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The D flip flop is powered by a voltage of 5V . This JK flip flop has a 3pFfarad input capacitance. It belongs to the family of electronic devices known as AHCT/VHCT/VT. There is an electronic component mounted in the way of Surface Mount. A total of 20pins are provided on this board. This device exhibits a clock edge trigger type of Positive Edge. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. For high efficiency, the supply voltage should be set to 5V. There is 4μA quiescent current consumption by it.
74AHCT374D-Q100J Features
Tape & Reel (TR) package
Automotive, AEC-Q100, 74AHCT series
20 pins
74AHCT374D-Q100J Applications
There are a lot of Nexperia USA Inc. 74AHCT374D-Q100J Flip Flops applications.
- Set-reset capability
- Balanced 24 mA output drivers
- Buffer registers
- Automotive
- 2 – Bit synchronous counter
- Asynchronous counter
- Digital electronics systems
- Instrumentation
- ESD protection
- Functionally equivalent to the MC10/100EL29
