Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
20 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Series |
74AHCT |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Type |
D-Type |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
74AHCT374 |
Function |
Standard |
Output Type |
Tri-State, Non-Inverted |
Operating Supply Voltage |
5V |
Number of Elements |
1 |
Polarity |
Non-Inverting |
Number of Ports |
2 |
Number of Bits |
8 |
Clock Frequency |
130MHz |
Propagation Delay |
10.4 ns |
Quiescent Current |
4μA |
Turn On Delay Time |
6.4 ns |
Family |
AHCT/VHCT/VT |
Logic Function |
D-Type, Flip-Flop |
Output Characteristics |
3-STATE |
Current - Output High, Low |
8mA 8mA |
Max Propagation Delay @ V, Max CL |
10.4ns @ 5V, 50pF |
Trigger Type |
Positive Edge |
Input Capacitance |
3pF |
Number of Input Lines |
8 |
Clock Edge Trigger Type |
Positive Edge |
Length |
6.5mm |
Width |
4.4mm |
RoHS Status |
ROHS3 Compliant |
74AHCT374PW-Q100J Overview
The package is in the form of 20-TSSOP (0.173, 4.40mm Width). The package Tape & Reel (TR)contains it. In the configuration, Tri-State, Non-Invertedis used as the output. Positive Edgeis the trigger it is configured with. Surface Mountmounts this electrical part. The supply voltage is set to 4.5V~5.5V. It is at -40°C~125°C TAdegrees Celsius that the system is operating. There is D-Type type of electronic flip flop associated with this device. The FPGA belongs to the 74AHCT series. You should not exceed 130MHzin the output frequency of the device. The element count is 1 . A total of 20terminations have been recorded. D latch belongs to the 74AHCT374 family. Power is supplied from a voltage of 5V volts. The input capacitance of this JK flip flopis 3pF farads. In this case, the D flip flop belongs to the AHCT/VHCT/VTfamily. There is an electronic part mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. A Positive Edgeclock edge trigger is used in this device. It is designed with 8bits. This flip flop has a total of 2ports. Optimal efficiency requires a supply voltage of 5V. Currently, there are 8 input lines present. Despite external influences, it consumes 4μAof quiescent current.
74AHCT374PW-Q100J Features
Tape & Reel (TR) package
74AHCT series
20 pins
8 Bits
74AHCT374PW-Q100J Applications
There are a lot of Nexperia USA Inc. 74AHCT374PW-Q100J Flip Flops applications.
- Single Up Count-Control Line
- Supports Live Insertion
- Clock pulse
- Balanced Propagation Delays
- Modulo – n – counter
- Differential Individual
- Frequency division
- Data storage
- Buffered Clock
- Parallel data storage