74ALVC164245DGG:51
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 48 |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Additional Feature | DUAL SUPPLY TRANSLATING TRANSCEIVER; PORT A IS OPERATED AT VOLTAGE 1.5-3.6 |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Power Supplies | 3.35V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | -500mV |
| Power Dissipation-Max | 500mW |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 7.5 ns |
| Quiescent Current | 100nA |
| Turn On Delay Time | 9.5 ns |
| Family | ALVC/VCX/A |
| Logic Function | Level Shifter, Transceiver, Translator |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Control Type | COMMON CONTROL |
| Count Direction | BIDIRECTIONAL |
| Translation | 3V & 5V |
| Width | 6.1mm |
| RoHS Status | RoHS Compliant |
74ALVC164245DGG:51 Overview
In the package TSSOP, it can be found.The circuit's superior flexibility is achieved through the use of 2 circuits.When it comes to terminating a transmission line, there are 48 terminations.With 48 pins, it is equipped with a minimal number of connections.With 48 pins, it is designed.The design of this electronic part contains 16 bits.The maximum supply voltage is 6V.With a minimum supply voltage of -500mV, it operates.Mounting this electronic component is done using the Surface Mount method.In Bus Driver/Transceivers, this part is included.There is BUS TRANSCEIVER logic IC in it.Typically, 2 transmission lines are terminated with an impedance-matching device that matches the characteristic impedance of the line.Electronic devices like this belong to the family ALVC/VCX/A.In the absence of external influences, it consumes 100nA of quiescent current.3.35V power supplies are required to run it.The reliability of this device indicates its suitability for TUBE as a result of its reliable performance.In addition, it is characterized by DUAL SUPPLY TRANSLATING TRANSCEIVER; PORT A IS OPERATED AT VOLTAGE 1.5-3.6.Level translators is recommended that the operating temperature be higher than -40°C.Level translators is recommended to work at a temperature lower than 125°C.
74ALVC164245DGG:51 Features
TSSOP package
2 circuits
48 pin count
48 pins
3.35V power supplies
74ALVC164245DGG:51 Applications
There are a lot of NXP Semiconductors / Freescale 74ALVC164245DGG:51 voltage translators & level shifters applications.
- SDIO
- Power-sensitive applications
- Extended Product-Change Notification
- Monitors
- Extended Product-Change Notification
- Driving indicator LEDs or buzzers
- Product Traceability
- Industrial Equipment
- Enterprise
- Personal computers
