74ALVCH16374DGG:51
| Parameters | |
|---|---|
| Input Capacitance | 5pF |
| Propagation Delay (tpd) | 6.5 ns |
| Width | 6.1mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALVCH |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ALVCH16374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 350MHz |
| Family | ALVC/VCX/A |
| Current - Quiescent (Iq) | 40μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 3.4ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 3.4 ns |
| Trigger Type | Positive Edge |
74ALVCH16374DGG:51 Overview
The flip flop is packaged in 48-TFSOP (0.240, 6.10mm Width). The package Tape & Reel (TR)contains it. As configured, the output uses Tri-State, Non-Inverted. This trigger uses the value Positive Edge. This electronic part is mounted in the way of Surface Mount. Powered by a 1.2V~3.6Vvolt supply, it operates as follows. -40°C~85°C TAis the operating temperature. This logic flip flop is classified as type D-Type. JK flip flop is a part of the 74ALVCHseries of FPGAs. There should be no greater frequency than 350MHzon its output. There are 2 elements in it. It consumes 40μA of quiescent current without being affected by external factors. There have been 48 terminations. D latch belongs to the 74ALVCH16374 family. An input voltage of 3.3Vpowers the D latch. This JK flip flop has a 5pFfarad input capacitance. Devices in the ALVC/VCX/Afamily are electronic devices. There is a base part number FF/Latchesfor the RS flip flops. Vsup reaches its maximum value at 3.6V. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. There are 3.3V power supplies attached to it. A D flip flop with 2embedded ports is available.
74ALVCH16374DGG:51 Features
Tape & Reel (TR) package
74ALVCH series
3.3V power supplies
74ALVCH16374DGG:51 Applications
There are a lot of NXP USA Inc. 74ALVCH16374DGG:51 Flip Flops applications.
- Bounce elimination switch
- Registers
- Digital electronics systems
- Frequency division
- Patented noise
- Reduced system switching noise
- Data Synchronizers
- Set-reset capability
- Buffered Clock
- CMOS Process
