74ALVCH16823DGGY
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Supplier Device Package | 56-TSSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALVCH |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 2.3V~2.7V 3V~3.6V |
| Frequency | 350MHz |
| Function | Master Reset |
| Output Type | Tri-State |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.2V |
| Clock Frequency | 350MHz |
| Propagation Delay | 3.7 ns |
| Quiescent Current | 750μA |
| Logic Function | D-Type |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 9 |
| Max Propagation Delay @ V, Max CL | 3.7ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | 24mA |
| Input Capacitance | 5pF |
| Low Level Output Current | 24mA |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | ROHS3 Compliant |
74ALVCH16823DGGY Overview
As a result, it is packaged as 56-TFSOP (0.240, 6.10mm Width). D flip flop is included in the Tape & Reel (TR)package. T flip flop is configured with an output of Tri-State. JK flip flop uses Positive Edgeas the trigger. Surface Mountis in the way of this electric part. The JK flip flop operates at 2.3V~2.7V 3V~3.6Vvolts. The operating temperature is -40°C~85°C TA. D-Typedescribes this flip flop. The 74ALVCHseries comprises this type of FPGA. A frequency of 350MHzshould be the maximum output frequency. The list contains 2 elements. The input capacitance of this JK flip flopis 5pF farads. Surface Mount mounts this electronic component. There are 56pins on it. The clock edge trigger type for this device is Positive Edge. This D latch consumes 750μA quiescent current at all. A 24mAvalue is set for the high level output current. In the low level output current setting, the current is set to 24mA. Ideally, the operating temperature should be lower than 85°C. Ideally, the operating temperature should be higher than -40°C. The RS flip flop is designed to operate with a minimal supply voltage of 1.2VV. There is a maximum voltage support of 3.6V. The frequency that can be achieved is 350MHz.
74ALVCH16823DGGY Features
Tape & Reel (TR) package
74ALVCH series
56 pins
74ALVCH16823DGGY Applications
There are a lot of Nexperia USA Inc. 74ALVCH16823DGGY Flip Flops applications.
- CMOS Process
- Data storage
- Frequency Dividers
- Event Detectors
- Storage registers
- Clock pulse
- Divide a clock signal by 2 or 4
- Load Control
- Instrumentation
- Parallel data storage
