74AVC16T245DGG,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | 74AVC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.1V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AVC16T245 |
| Pin Count | 48 |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 800mV |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 3 ns |
| Quiescent Current | 185μA |
| Turn On Delay Time | 11.8 ns |
| Family | AVC |
| Logic Function | Transceiver, Translator |
| Data Rate | 380Mbps |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -12mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 12mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 0.8V~3.6V |
| Voltage - VCCB | 0.8V~3.6V |
| Channels per Circuit | 8 |
| Width | 6.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74AVC16T245DGG,118 Overview
There is an embedded version of it in package 48-TFSOP (0.240, 6.10mm Width).A Tape & Reel (TR) package is used to package it.This output is configured with Tri-State, Non-Inverted.There is a translator type of Voltage Level for this electrical device.Mounting this electronic component follows the Surface Mount method.Level translators has the Channel type Bidirectional.There is -40°C~125°C TA operating temperature.Transmission lines can be terminated using 48 terminations to end them.A series of related parts can be derived from the base part number 74AVC16T245.A supply voltage of 1.1V is used to power the device.The device has a pin count of 48.The device is part of the 74AVC series.The 48 pins are designed into it.Level translators is designed wLevel translatorsh 16 bLevel translatorss.Voltages above 3.6V are supported.There is a minimum supply voltage of 800mV for it.There is a configuration of 0.8V~3.6V for the VCCA supply rail.There is a configuration of 0.8V~3.6V for the VCCB supply rail.With the Surface Mount method, it is mounted.Level translators uses a logic IC of type BUS TRANSCEIVER.2 terminations are used as the methods of ending a transmission line with a device that matches the line's characteristic impedance.Despite the fact that it is an electronic device, it belongs to the AVC family.Level translators consumes 185μA of quiescent current wLevel translatorshout being affected by external factors. 2 elements are present in it.
74AVC16T245DGG,118 Features
48-TFSOP (0.240, 6.10mm Width) package
48 pin count
74AVC series
48 pins
2 elements
74AVC16T245DGG,118 Applications
There are a lot of Nexperia USA Inc. 74AVC16T245DGG,118 voltage translators & level shifters applications.
- Public Signage
- Wearable Health and Fitness Devices
- UART
- One Assembly and Test Site
- Wireless and Telecom Infrastructures
- Telecom
- Monitors
- Handset
- Signaling Level Conversion for Clock or Data
- Telecommunications
