74AVC1T45GM,115
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFDFN |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74AVC |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Terminal Finish | Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AVC1T45 |
| Pin Count | 6 |
| Output Type | Tri-State, Non-Inverted |
| Number of Channels | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 100mA |
| Number of Ports | 2 |
| Max Supply Current | 100mA |
| Number of Bits | 1 |
| Propagation Delay | 2.7 ns |
| Quiescent Current | 24μA |
| Family | AVC |
| Logic Function | Translator |
| Data Rate | 500Mbps |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | BUS TRANSCEIVER |
| Max Dual Supply Voltage | 3.6V |
| Min Dual Supply Voltage | 800mV |
| High Level Output Current | -12mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 12mA |
| Translator Type | Voltage Level |
| Number of Transmitters | 2 |
| Voltage - VCCA | 0.8V~3.6V |
| Voltage - VCCB | 0.8V~3.6V |
| Height Seated (Max) | 0.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74AVC1T45GM,115 Overview
Embedded in the 6-XFDFN package, it is available for you to use.The package is in the form of Tape & Reel (TR).Tri-State, Non-Inverted is the output configured for it.There is Voltage Level translator type for this electrical device.Surface Mount is used to mount this electronic part.In this electrical device, the Channel type is Bidirectional.There is -40°C~125°C TA operating temperature.There is a base part number 74AVC1T45 that refers to the related parts.This device is powered by a supply voltage of 1.2V which is applied to it.There are 6 pins on it.There is one device in the 74AVC series, and it belongs to that series.In addition, it is designed with a pin number of 6.There are 1 bits in this electronic part.There is a maximum voltage of 3.6V supported.There is a minimum supply voltage of 800mV for it.0.8V~3.6V is the supply rail configuration on the VCCA.A VCCB supply rail is configured as 0.8V~3.6V.Surface Mount is used for mounting.Channel count is 1.There is a logic IC BUS TRANSCEIVER used in the system.Typically, 2 transmission lines are terminated with an impedance-matching device that matches the characteristic impedance of the line.Electronic devices like this belong to the family AVC.There are no external factors that affect it, so it consumes 24μA quiescent current.
74AVC1T45GM,115 Features
6-XFDFN package
6 pin count
74AVC series
6 pins
74AVC1T45GM,115 Applications
There are a lot of Nexperia USA Inc. 74AVC1T45GM,115 voltage translators & level shifters applications.
- Motor Drives
- Notebook
- One Fabrication Site
- Enterprise and communications
- Enterprise
- Routers (routing equipment)
- Wearable Health and Fitness Devices
- PMBus
- Telecom
- Telecommunications
