74CB3Q3245RGYRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Number of Pins | 20 |
| Weight | 43.006227mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CB |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Type | Bus Switch |
| Resistance | 9Ohm |
| Voltage - Supply | 2.3V~3.6V |
| Base Part Number | 74CB3Q3245 |
| Circuit | 8 x 1:1 |
| Nominal Supply Current | 1mA |
| Output Current | 30mA |
| Number of Bits | 8 |
| Propagation Delay | 200 ps |
| Quiescent Current | 2mA |
| Turn On Delay Time | 7.5 ns |
| Supply Type | Single |
| Bandwidth | 500MHz |
| High Level Output Current | -64mA |
| Low Level Output Current | 64mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1mm |
| Length | 4.5mm |
| Width | 3.5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74CB3Q3245RGYRG4 Overview
Providing this information in the 20-VFQFN Exposed Pad enables digital switch board space to be saved.Tape & Reel (TR) represents its packaging.The method digital switch ic adopts for mounting is Surface Mount.A digital IC Bus Switch is used as the analog component of the multiplexers.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.With a supply voltage of 2.3V~3.6V, designers have greater flexibility of digital controlled switch.These multiplexers are members of the 74CB series, which provide extensive application potential.You can also find related parts by using its logic switch base part number of 74CB3Q3245.There is a type of supply Single that is employed in this case.A total of 20 pins are configured on this board.The mount is in Surface Mount.Signal multiplexer provides 8 bits.It consumes 2mA current of multiplexer ic without external influences.The resistance of the signal switching is 9Ohm.For higher switches' flexibility, the output current is set to 30mA.
74CB3Q3245RGYRG4 Features
Supplied in the 20-VFQFN Exposed Pad package
Adopting a supply type of Single
74CB3Q3245RGYRG4 Applications
There are a lot of Texas Instruments 74CB3Q3245RGYRG4 Signal Switches / Multiplexers / Decoders applications.
- Metal detectors
- High-performance memory-decoding applications
- Automation system
- Used to connect a single source to multiple destinations
- Electronically controlled engine system
- Enabling block of memory depending on address in memory chips
- Memory chips
- Time division multiplexing system
- D/A converters
- Combinational circuit
