74CBTLV3245PW,118
| Parameters | |
|---|---|
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | 74CBTLV |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | Bus Switch |
| Resistance | 60Ohm |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74CBTLV3245 |
| Pin Count | 20 |
| Circuit | 8 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Ports | 2 |
| Nominal Supply Current | 100mA |
| Number of Bits | 8 |
| Propagation Delay | 310 ps |
| Quiescent Current | 50μA |
| Turn On Delay Time | 8 ns |
| Family | CBTLV/3B |
| Supply Type | Single |
| Turn-Off Delay Time | 8 ns |
| Output Polarity | TRUE |
74CBTLV3245PW,118 Overview
It is included in the 20-TSSOP (0.173, 4.40mm Width) in order to save board space.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .the multiplexers uses an analog IC Bus Switch.The operating temperature of -40°C~125°C will not be susceptible to external factors.With a supply voltage of 2.3V~3.6V, designers have greater flexibility of digital controlled switch.Multiplexers from the 74CBTLV series can be used in a wide range of applications.As part of its basic configuration, 20 terminations are designed as a part of it.There is a base part number 74CBTLV3245 that can be used to locate signal switch's related components as well.This turn signal switch consists of 20 component pins.As a result, conductors end at GULL WING.Its supply type is Single, which is used as the source of power.Currently, it is configured with 20 pins.This unit is mounted in the way of Surface Mount.The logic switch belongs to the family of CBTLV/3B.There are 8 bits signal multiplexer provides.It is recommended that the minimum supply voltage (Vsup) be kept at 2.3V so that unnecessary failures can be prevented.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V in order to prevent some unnecessary failures.It consumes 50μA current of multiplexer ic without external influences.This signal switching operates at a resistance of 2.The system operates with a resistance of 60Ohm.
74CBTLV3245PW,118 Features
Supplied in the 20-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
74CBTLV3245PW,118 Applications
There are a lot of Nexperia USA Inc. 74CBTLV3245PW,118 Signal Switches / Multiplexers / Decoders applications.
- Medical industry
- Electronic circuits
- Small scale TV wall
- Metal detectors
- VGA
- High-performance memory-decoding applications
- Encrypted communications system
- RF-based home automation system
- Seven segment displays
- Arithmetic Logic Units
