74CBTLV3253DBQRG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 74.502547mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTLV |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 27Ohm |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74CBTLV3253 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Circuit | 2 x 4:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Bits | 2 |
| Propagation Delay | 6.8 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 6.8 ns |
| Family | CBTLV/3B |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74CBTLV3253DBQRG4 Overview
Due to the fact that it is provided in the 16-SSOP (0.154, 3.90mm Width), digital switch allows the board to be compacted.It is packaged in the way of Tape & Reel (TR).Surface Mount is the mounting method digital switch ic uses.the multiplexers uses IC Multiplexer/Demultiplexer as the analog IC.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.Using a 2.3V~3.6V supply voltage provides digital controlled switch's superior flexibility for designers.The multiplexers from 74CBTLV series can be used for a wide range of applications.Its basic configuration includes terminations in the 16 range.Its logic switch base part number is 74CBTLV3253 which can also be used to find its logic switch related parts.For multiplexer's system, 2.5V voltage is supplied.This turn signal switch has a total of 16 component pins.As a result, conductors end at GULL WING.As a type of supply, Single is employed.It is configured with 16 pins.As you can see, it is mounted in the direction of Surface Mount.Among the family of CBTLV/3B the logic switch is a member.In this signal multiplexer, there are 2 bits that are provided.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V so as to avoid some unnecessary failures.There are 4 outputs designed to operate the turn signal switch.I would classify the digital switch ic as an electronic part belonging to the Other Logic ICs category.Despite not interacting with external factors, it consumes 10μA current of multiplexer ic.This multiplexer is equipped with 8 inputs and 8 outputs.It operates with a resistance of 27Ohm.
74CBTLV3253DBQRG4 Features
Supplied in the 16-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
74CBTLV3253DBQRG4 Applications
There are a lot of Texas Instruments 74CBTLV3253DBQRG4 Signal Switches / Multiplexers / Decoders applications.
- Automation system
- Medical industry
- Video transmission
- Computer memory
- Medium scale TV wall
- Signal router
- Injectors
- Used to connect a single source to multiple destinations
- Logic gates for other digital devices
- Enabling block of memory depending on address in memory chips
