74F373PC
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Supplier Device Package | 20-PDIP |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2000 |
| Series | 74F |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74F373 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 55mA |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 13 ns |
| Quiescent Current | 38mA |
| Turn On Delay Time | 5.3 ns |
| Logic Function | D-Type, Latch |
| Number of Inputs | 1 |
| Current - Output High, Low | 3mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Number of Gates | 8 |
| High Level Output Current | -3mA |
| Low Level Output Current | 24mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Delay Time - Propagation | 5.3ns |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
74F373PC Overview
Package 20-DIP (0.300, 7.62mm) includes it. The package is in the form of Tube. The output it is configured with uses Tri-State. D-Type Transparent Latch is the logic type of this electrical device. Through Hole is used to mount this electronic part. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. The operating temperature is 0°C~70°C. In the 74F series, this FPGA is located. The electronic part in this image has 8 bits. The family in which it belongs to is 74F373. In addition, it is designed with a pin number of 20. The electronic part is mounted using the Through Hole method. In the circuit, there are 8 input lines that are constituted by an electronic circuit. As the output current is 24mA, the design flexibility is maximum. The supply voltage should be maintained at 5V for high efficiency. A binary equivalent of the input line is generated by the 3 output lines. It consumes 38mA of quiescent current without being affected by external factors. This object is composed of 1 elements. The circuit's superior flexibility is achieved through the use of 8 circuits. There is 24mA output current at the low level. There is -3mA high level output current set. It is recommended to work at a temperature lower than 70°C. There should be a temperature above 0°C at which the device operates. 5.5V is the maximum voltage it supports. The minimal voltage for operation is 4.5V.
74F373PC Features
20-DIP (0.300, 7.62mm) package
74F series
8 Bits
74F373 family
20 pins
1 elements
74F373PC Applications
There are a lot of ON Semiconductor 74F373PC Latches applications.
- Automotive Infotainment
- Watches
- A/D converters
- Automotive Body Electronics
- Programmable binary
- Counter control
- Lamp and Display (LED)
- Serial Input
- Parallel-to-Serial Data Conversion
- BCD counting
