74F821SCX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Supplier Device Package | 24-SOP |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74F |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 150MHz |
| Base Part Number | 74F821 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 10 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 10 |
| Clock Frequency | 150MHz |
| Propagation Delay | 9.5 ns |
| Turn On Delay Time | 6.4 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 100mA |
| Current - Output High, Low | 3mA 24mA |
| Number of Bits per Element | 10 |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -3mA |
| Low Level Output Current | 24mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74F821SCX Overview
As a result, it is packaged as 24-SOIC (0.295, 7.50mm Width). Package Tape & Reel (TR)embeds it. The output it is configured with uses Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. The electronic part is mounted in the way of Surface Mount. The JK flip flop operates at 4.5V~5.5Vvolts. It is at 0°C~70°C TAdegrees Celsius that the system is operating. D-Typeis the type of this D latch. In terms of FPGAs, it belongs to the 74F series. It should not exceed 150MHzin its output frequency. The element count is 1 . There is a consumption of 100mAof quiescent energy. This D latch belongs to the family of 74F821. It is mounted by the way of Surface Mount. The electronic flip flop is designed with pins 24. A Positive Edgeclock edge trigger is used in this device. It is designed with 10bits. Due to its superior flexibility, it uses 10 circuits. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. It is designed with 1 output lines. This input has 1lines. A high level output current of -3mAis set. There is no low level output current set at 24mA. It is recommended that the operating temperature be below 70°C. Ideally, the operating temperature should be higher than 0°C. The minimal supply voltage is 4.5V. In this case, it supports a maximum supply voltage of 5.5V. It is possible to achieve 150MHz frequencies.
74F821SCX Features
Tape & Reel (TR) package
74F series
24 pins
10 Bits
74F821SCX Applications
There are a lot of ON Semiconductor 74F821SCX Flip Flops applications.
- Pattern generators
- Balanced Propagation Delays
- Clock pulse
- High Performance Logic for test systems
- Modulo – n – counter
- Asynchronous counter
- Individual Asynchronous Resets
- Data transfer
- Patented noise
- Control circuits
