74FCT162373ETPVG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 48 |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Prop. Delay@Nom-Sup | 3.4 ns |
| High Level Output Current | 24mA |
| Propagation Delay (tpd) | 3.7 ns |
| Low Level Output Current | 24mA |
| Independent Circuits | 2 |
| Height | 2.3mm |
| Length | 15.9mm |
| Width | 7.5mm |
| Thickness | 2.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT162373ETPVG8 Overview
In the SSOP package, it is embedded. It is packaged in the way of Tape & Reel (TR). An electronic part with 8 bits is designed. As far as this device is concerned, it has no terminations. The device is operated when the supply voltage is set to 5V. The 48 pind are equipped with it. In terms of electronic devices, this one is in the FCT family. It is designed with 48 pins. Surface Mount is the way in which this electronic part is mounted. This device is equipped with 2 ports. The part belongs to the FF/Latches subcategory. During this period, the maximum supply voltage (Vsup) reaches 5.5V. 5V power supplies are needed to operate it. It is recommended to have a higher supply voltage (Vsup) than 4.5V. Based on its reliable performance, this device is suitable for TAPE AND REEL. It has been set to 24mA for the low level output current. 24mA is set as the high level output current. It is recommended to work at a temperature lower than 85°C. Temperatures higher than -40°C should be used for operation. As far as the logic IC is concerned, it uses BUS DRIVER.
74FCT162373ETPVG8 Features
SSOP package
8 Bits
48 pin count
48 pins
5V power supplies
74FCT162373ETPVG8 Applications
There are a lot of Integrated Device Technology (IDT) 74FCT162373ETPVG8 Latches applications.
- Network Switches
- Serial Input
- Programmable binary
- Shift left with parallel loading
- Frequency
- Multi-line decoders
- A/D converters
- Relay
- Four-bit storage with output enable
- Decade counting 7-segment decimal display
