74FCT162501CTPAG
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 18 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Ports | 2 |
| Number of Bits | 18 |
| Propagation Delay | 5.2 ns |
| Quiescent Current | 500μA |
| Family | FCT |
| Logic Function | Transceiver |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Max I(ol) | 0.024 A |
| Prop. Delay@Nom-Sup | 4.3 ns |
| Trigger Type | POSITIVE EDGE |
| High Level Output Current | 24mA |
| Low Level Output Current | 24mA |
| Control Type | INDEPENDENT CONTROL |
| Translation | N/A |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT162501CTPAG Overview
There is an embedded version of it in the TSSOP package. It can be said that there is a technique of terminating transmission lines that uses a device that matches the characteristics of the line impedance, called 56 terminations. In order to maintain normal operation of the device, the supply voltage should remain above 5V. There is a 56 pin count that is included in this device. In order to design this electronic part, 18 Bits have been used. It is possible to terminate a transmission line with a device that matches the line's characteristic impedance, known as 2 terminations. In this case, the electronic part will be mounted in the Surface Mount-direction. A 56-pin design is used. The electronic device in question belongs to the FCT family of electronic devices. Powered by 5V power supplies, it runs on a battery. An element of this system consists of 1 components. It is configured with a trigger that uses POSITIVE EDGE. As a result of its reliable performance, this device is well suited for TUBE. There is also another characteristic of it that has to do with WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION. We are seeing an increase in the number of channels, which is good/bad: 18. There is a supply voltage of 5V that is used to power this electrical part. The quiescent current consumption in this case will not be affected by external factors such as temperature and weather. During operation, a minimum supply voltage of 4.5V is used. 5.5V's maximum supply voltage is supported by it. High-level output current is represented by 24mA. As far as the operating temperature is concerned, it should be higher than -40°C. It is ideal to have an operating temperature that is lower than 85°C.
74FCT162501CTPAG Features
TSSOP package
56 pin count
56 pins
5V power supplies
1 elements
74FCT162501CTPAG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT162501CTPAG Universal Bus Functions applications.
- Agriculture and light complementary power station
- Freezer warning buzzer circuits
- Audio
- Grid adaptation function
- Server
- Island protection
- Circuits involving computation and processing
- Memory devices
- automatic temperature control circuits
- Industrial plant
