74FCT162501CTPVCG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74FCT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| HTS Code | 8542.39.00.01 |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT162501 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Circuits | 18-Bit |
| Number of Ports | 2 |
| Number of Bits | 18 |
| Propagation Delay | 5.3 ns |
| Family | FCT |
| Logic Function | Transceiver |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | Universal Bus Transceiver |
| Max I(ol) | 0.024 A |
| Prop. Delay@Nom-Sup | 4.6 ns |
| Trigger Type | POSITIVE EDGE |
| Control Type | INDEPENDENT CONTROL |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height Seated (Max) | 2.79mm |
| Length | 18.415mm |
| Width | 7.49mm |
| RoHS Status | ROHS3 Compliant |
74FCT162501CTPVCG4 Overview
There is an embedded version of it in the 56-BSSOP (0.295, 7.50mm Width) package. I have packaged it in a way that is similar to Tube's. In order to achieve this superior flexibility, 18-Bit circuits are used. The Logic type of this electrical device is Universal Bus Transceiver. As you can see from the image, this electronic component is mounted in a Surface Mount-direction. The operating temperature should be higher than -40°C~85°C in order for the machine to function properly. Due to its high and low output current options, 24mA 24mA's maximum level of flexibility is achieved when it comes to designing its features. FPGAs in the 74FCT series are this type. The supply voltage for the machine is 4.5V~5.5V and it operates on that voltage. It belongs to 74FCT162501 family. There is one type of termination that is called the 56 termination, which consists in terminating a transmission line with a device that has an impedance that matches the characteristic impedance of the line itself. Normal operation requires an output voltage above 5V. It is equipped with 56 pin count. In order to design this electronic part, 18 Bits have been used. 2 terminations are the kind of termination that occurs when a transmission line is terminated with a device that matches the characteristic impedance of the transmission line. Surface Mount is used to mount this electronic part. It has 56 pins. In the family of FCT devices, this electronic device belongs. Upon reaching 5.5V, the supply voltage (Vsup) reaches its maximum value. There should be a greater supply voltage (Vsup) than 4.5V. Powered by 5V batteries, it operates on a 12V system. There is a trigger configured with POSITIVE EDGE for this device.
74FCT162501CTPVCG4 Features
56-BSSOP (0.295, 7.50mm Width) package
74FCT series
74FCT162501 family
56 pin count
56 pins
5V power supplies
74FCT162501CTPVCG4 Applications
There are a lot of Texas Instruments 74FCT162501CTPVCG4 Universal Bus Functions applications.
- Electronic and electrical project circuits
- Digital camera
- Electrical tools
- Analog ICs
- Disk read-write IC
- Square wave oscillators
- Wearable Health and Fitness Devices
- Digital system
- Photovoltaic grid-connected power system
- Air conditioner
