74FCT16373ATPACTG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 48 |
| Weight | 223.195796mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 16.5mA |
| Current - Output | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 5.2 ns |
| Quiescent Current | 500μA |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -32mA |
| Low Level Output Current | 64mA |
| Number of Input Lines | 16 |
| Width | 6.1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT16373ATPACTG4 Overview
In the TSSOP package, it can be found as an embedded module. As a result, it has a packaging of Tape and Reel. The design of this electronic part is based on 8 bits. In this device, there are 48 terminations that have been designed. With the supply voltage set at 5V, it is able to operate. There are 48 pins attached to it. In the world of electronics, this electronic device belongs to the family of FCT. This board has 48 pins on it, which is what it is designed for. The electronic part is mounted in a way that corresponds to Surface Mount. 2 ports are available on this device. Subcategory FF/Latches includes this part. There is 5V power supply for it. Electronic circuits comprise 16 input lines. High efficiency requires maintaining the supply voltage at 5V. It consumes 500μA of quiescent current without being affected by external factors. There are 2 elements in it. 64mA is set as the low level output current. The high level output current is set to -32mA. Ideally, the temperature should not be higher than 85°C. It is recommended that the operating temperature be higher than -40°C. It is capable of providing a maximum supply voltage of 5.5V. This device requires a minimum voltage of 4.5V. There is a logic IC BUS DRIVER used in the system. The output current of this device is 64mA, which makes it a very flexible design element.
74FCT16373ATPACTG4 Features
TSSOP package
8 Bits
48 pin count
48 pins
5V power supplies
2 elements
74FCT16373ATPACTG4 Applications
There are a lot of Texas Instruments 74FCT16373ATPACTG4 Latches applications.
- Relay replacement
- Pseudo-random code generators
- Parallel data storage
- Accumulator Registers
- Address register
- General-Purpose Register
- PCs and Notebooks
- Hammer Device Information
- Phase comparator
- Timers
