Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Package / Case |
TSSOP |
Number of Pins |
48 |
Packaging |
Tape & Reel (TR) |
Published |
2009 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
48 |
ECCN Code |
EAR99 |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
FF/Latches |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Pin Count |
48 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5V |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Temperature Grade |
INDUSTRIAL |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Number of Bits |
16 |
Propagation Delay |
8.5 ns |
Turn On Delay Time |
1.5 ns |
Family |
FCT |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Logic IC Type |
BUS DRIVER |
Max I(ol) |
0.064 A |
High Level Output Current |
64mA |
Low Level Output Current |
32mA |
Independent Circuits |
2 |
Length |
12.5mm |
Width |
6.1mm |
Thickness |
1mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
74FCT16373ATPAG8 Overview
The package in which it is embedded is named TSSOP. It is packaged in the way of Tape & Reel (TR). With this electronic part, there are 16 bits. There are 48 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. With the supply voltage set at 5V, it is able to operate. The 48 pind are equipped with it. It is a member of the FCT family of electronic devices. The pin configuration of the device is 48. Surface Mount is the method used for mounting this electronic part. This device has 2 ports. The part is in the FF/Latches subcategory. 5V power supplies are needed to operate it. Based on its reliable performance, this device is well suited to TAPE AND REEL. High efficiency requires maintaining the supply voltage at 5V. It has been set to 32mA for the low level output current. There is 64mA high level output current set. Ideally, the temperature should not be higher than 85°C. A temperature greater than -40°C should be used as the operating temperature. 5.5V is the maximum voltage it supports. In order for the machine to operate, the supply voltage must be 4.5V. The logic IC it adopts is BUS DRIVER.
74FCT16373ATPAG8 Features
TSSOP package
16 Bits
48 pin count
48 pins
5V power supplies
74FCT16373ATPAG8 Applications
There are a lot of Integrated Device Technology (IDT) 74FCT16373ATPAG8 Latches applications.
- General-Purpose Register
- Accumulator Registers
- Ring counter
- Double bus register system
- Automotive Cluster
- Programmable binary
- Avionics
- Address register
- Control circuits
- Motor Drives