74FCT16501ATPVCTG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| HTS Code | 8542.39.00.01 |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT16501 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 18-Bit |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Ports | 2 |
| Number of Bits | 18 |
| Propagation Delay | 5.6 ns |
| Family | FCT |
| Logic Function | Transceiver |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | Universal Bus Transceiver |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 5.1 ns |
| Trigger Type | POSITIVE EDGE |
| Control Type | INDEPENDENT CONTROL |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height Seated (Max) | 2.79mm |
| Length | 18.415mm |
| Width | 7.49mm |
| RoHS Status | ROHS3 Compliant |
74FCT16501ATPVCTG4 Overview
Embedded in the 56-BSSOP (0.295, 7.50mm Width) package, it is used by many applications. In this case, it is packaged in the same way as Tape & Reel (TR). A 18-Bit circuit achieves its superior flexibility by using 18-Bit components. Logic type Universal Bus Transceiver describes this electrical device. Surface Mount is pointing towards the electronic part. The operating temperature should be higher than -40°C~85°C in order for the machine to function properly. In order to ensure maximum design flexibility, it features a High/Low output current of 32mA 64mA. FPGAs in the 74FCT series are this type. It belongs to the 74FCT16501 family. Transmission lines can be terminated with 56 terminations by using a device that matches the characteristic impedance. As a rule of thumb, the supply voltage should be maintained above 5V to ensure normal operation. In addition, it is equipped with a 56 pin count. There is an electronic part in this product that has been designed with 18 Bits. Transmission lines are terminated with 2 terminations, which are devices matching the line's characteristic impedance. In this case, the electronic part will be mounted in the Surface Mount-direction. A 56-pin is used in this design. This electronic device belongs to the family of FCT. Powered by 5V power supplies, it runs on a battery. There is a trigger configured with POSITIVE EDGE for this device. Due to the reliable performance of the device, it is well suited for TAPE AND REEL. This device requires a voltage supply of 4.5V to operate. 5.5V's maximal supply voltage is supported by this device.
74FCT16501ATPVCTG4 Features
56-BSSOP (0.295, 7.50mm Width) package
74FCT series
74FCT16501 family
56 pin count
56 pins
5V power supplies
74FCT16501ATPVCTG4 Applications
There are a lot of Texas Instruments 74FCT16501ATPVCTG4 Universal Bus Functions applications.
- Wearable Health and Fitness Devices
- Light-activated burglar alarm
- Car
- Ship
- Tablets
- Small and medium distributed photovoltaic power generation system
- Washing machine
- Remote monitoring
- Massager
- Automatic digital control circuits
