74FCT373ATPYG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 20 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 8.5 ns |
| Turn On Delay Time | 2 ns |
| Logic Function | Latch |
| High Level Output Current | 48mA |
| Low Level Output Current | 15mA |
| Independent Circuits | 1 |
| Height | 1.73mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.73mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT373ATPYG8 Overview
In the SSOP package, it is embedded. With this electronic part, there are 8 bits. There are 20 pins on it. It is designed with 20 pins. It is mounted according to the Surface Mount method. 2 ports are available on this device. It operates from 5V power supplies. Optimal efficiency requires 5V as the supply voltage. 15mA is set as the low level output current. 48mA is set as the high level output current. Ideally, the operating temperature should be lower than 85°C. There should be a temperature above -40°C at which the device operates. 5.25V is the maximum voltage it supports. It operates with the minimal supply voltage of 4.75V.
74FCT373ATPYG8 Features
SSOP package
8 Bits
20 pin count
20 pins
5V power supplies
74FCT373ATPYG8 Applications
There are a lot of Integrated Device Technology (IDT) 74FCT373ATPYG8 Latches applications.
- Up-Down Johnson
- Control circuits
- Accumulator Registers
- TV Set-top Boxes
- Watches
- PCs and Notebooks
- Counter timers
- Sample and hold register
- Buffer register
- Serial Input
