74FCT377CTSOG8
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | WITH HOLD MODE |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 5.2 ns |
| Quiescent Current | 1mA |
| Turn On Delay Time | 5.2 ns |
| Family | FCT |
| Logic Function | AND, D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | D FLIP-FLOP |
| High Level Output Current | -15mA |
| Low Level Output Current | 12mA |
| Clock Edge Trigger Type | Positive Edge |
| Capacitance - Input | 6pF |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.6mm |
| Thickness | 2.34mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT377CTSOG8 Overview
The package is in the form of SOIC. In total, it contains 1 elements. It has been determined that there have been 20 terminations. It is powered by a voltage of 5V . A device of this type belongs to the family of FCT. Electronic part Surface Mountis mounted in the way. Basically, it is designed with a set of 20 pins. There is a clock edge trigger type of Positive Edgeon this device. This part is included in FF/Latches. The design is based on 8bits. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. In order for the device to operate, it requires 5V power supplies. In order to achieve high efficiency, the supply voltage should be maintained at 5V. It consumes a total of 1mA quiescent current at any given time. As an additional reference, you may refer to electronic flip flop WITH HOLD MODE. There is -15mA output current at the high level. There is no low level output current set at 12mA. Temperatures below 85°Care ideal for operating. Temperatures above -40°Cshould be used. It operates with the minimal supply voltage of 4.75V. 5.25Vis the maximum supply voltage it supports. It uses D FLIP-FLOPas its logic IC. There are 1 functions available on this T flip flop. It is equipped with 20 pin count.
74FCT377CTSOG8 Features
20 pins
8 Bits
5V power supplies
1 Functions
20 pin count
74FCT377CTSOG8 Applications
There are a lot of Integrated Device Technology (IDT) 74FCT377CTSOG8 Flip Flops applications.
- Memory
- Buffered Clock
- Safety Clamp
- Circuit Design
- Reduced system switching noise
- QML qualified product
- Divide a clock signal by 2 or 4
- Control circuits
- Shift Registers
- Buffer registers
