74FCT521CTQG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 20 |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | CASCADABLE |
| Subcategory | Arithmetic Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 50pF |
| Max Supply Current | 4.5mA |
| Number of Bits | 8 |
| Propagation Delay | 4.5 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 4.5 ns |
| Family | FCT |
| Logic IC Type | IDENTITY COMPARATOR |
| High Level Output Current | 48mA |
| Low Level Output Current | 48mA |
| Height Seated (Max) | 1.75mm |
| Length | 8.7mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT521CTQG Overview
There is no doubt that the QSOP is well known in the electronic industry due to its low package cost.The electronic part in this photo is designed using 8 Bits.An example of a 20 termination would be one in which the characteristic impedance of the transmission line is matched to the device terminating the transmission line.The device is equipped with 1 functions.Power comes from a supply voltage of 5V.This device has a 20 Pin Count.20 pins, or pronged contacts, are part of signal interfaces on computers and other communications devices.A Surface Mount-axis mount is used for this electronic part.Electronic devices of this type are known as FCT devices.Comparator can be found under the Arithmetic Circuits Subcategory.5V power supplies power it.CASCADABLE, for instance, is included in the additions.Current supply is limited to 4.5mA during operation.At 5V, the supply voltage should be maintained.There is no external influence on its consumption of quiescent current 10μA.This device operates at its maximum Operating Temperature of 85°C in order to ensure its reliability.A warmer temperature than -40°C should be reached when it is operating.5.25V can be supplied with its maximum voltage.Comparator operates at 4.75V, which is a minimal supply voltage.There is a 48mA setting for high-level output current.There is a low level output current set to 48mA.This logic IC is IDENTITY COMPARATOR.
74FCT521CTQG Features
QSOP package
8 Bits
20 terminations
1 Functions
20 pin count
5V power supplies
the maximal supply voltage of 5.25V
74FCT521CTQG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT521CTQG applications of comparators.
- Fixed or programmable irequency division
- Companion Appliceation Nole, ICAN-6374, "Application of the CMOS CD4059A Programmable Divide-by-N Counter in FM and Ctizens Band Transceiver Digital Tuners"
- “Time out" timer for consume-appication industrial controls
- Process contollenr
- Communications digltal frequency synthesizers: VHF, UHF, FM, AM, etc.
- Servo Motor Controls
- Servo motor controls
