74FCT574ATSOG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 800.987426mg |
| Packaging | Rail/Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | BROADSIDE VERSION OF 374 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 6.5 ns |
| Quiescent Current | 1mA |
| Turn On Delay Time | 6.5 ns |
| Family | FCT |
| Logic Function | D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -15mA |
| Low Level Output Current | 48mA |
| Clock Edge Trigger Type | Positive Edge |
| Capacitance - Input | 6pF |
| Height | 2.34mm |
| Length | 12.8mm |
| Width | 7.6mm |
| Thickness | 2.34mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT574ATSOG Overview
The flip flop is packaged in SOIC. It is included in the package Rail/Tube. D latch consists of 1 elements. Currently, there are 20 terminations. The power source is powered by 5V. It is a member of the FCTfamily of D flip flop. Electronic part Surface Mountis mounted in the way. Basically, it is designed with a set of 20 pins. This device exhibits a clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. There are 8bits in its design. The D latch runs on a voltage of 5V volts. This flip flop has a total of 2ports. In order to ensure high efficiency, the supply voltage should remain at 5V. It consumes 1mA current. In addition, BROADSIDE VERSION OF 374is a characteristic of it. There is -15mA output current at the high level. 48mAis set as the low level output current. A temperature below 85°Cshould be used for operation. It is recommended that the operating temperature be greater than -40°C. A minimum supply voltage of 4.75V is required for these RS flip flops to operate. A maximum voltage of 5.25V can be provided by it. In this case, it uses a BUS DRIVER logic IC. It is equipped with 1 Functions . 20pins are available on this JK flip flop.
74FCT574ATSOG Features
Rail/Tube package
20 pins
8 Bits
5V power supplies
1 Functions
20 pin count
74FCT574ATSOG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT574ATSOG Flip Flops applications.
- Individual Asynchronous Resets
- Frequency Divider circuits
- Divide a clock signal by 2 or 4
- Cold spare funcion
- Storage registers
- Common Clocks
- Dynamic threshold performance
- QML qualified product
- Control circuits
- Data Synchronizers
