74GTLP2033DGGRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 48 |
| Weight | 223.195796mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 175MHz |
| Pin Count | 48 |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Number of Ports | 2 |
| Nominal Supply Current | 40mA |
| Current - Output | 100mA |
| Number of Bits | 8 |
| Propagation Delay | 8.8 ns |
| Family | GTLP |
| Logic Function | Transceiver |
| Direction | Bidirectional |
| Output Characteristics | OPEN-DRAIN/3-STATE |
| Output Polarity | INVERTED |
| Max I(ol) | 0.1 A |
| Prop. Delay@Nom-Sup | 7.4 ns |
| Trigger Type | POSITIVE EDGE |
| Control Type | INDEPENDENT CONTROL |
| Translation | GTL/P & LVTTL |
| Height Seated (Max) | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
74GTLP2033DGGRE4 Overview
In the TSSOP package, it is embedded.To end a transmission line, there are 48 types of termination that can be used.Level translators is powered from a supply voltage of 3.3V.Pin count is 48.The board has 48 pins.This electronic part is designed with 8 Bits.Voltages up to 3.45V can be supplied.A minimal voltage of 3.15V is needed to operate it.This mount is done using the method of Surface Mount.2 terminations are used to end transmission lines by matching their characteristic impedance with the device.Level translators is part of the family of electronic devices called GTLP.Power comes from a 3.3V supply.Considering its reliability, this device is appropriate for TAPE AND REEL.A temperature of at least [0°C] should be used for the operation.Lower than 85°C is the ideal operating temperature.The output current of 100mA makes it feature maximum design flexibility.Level shifter is possible to achieve 175MHz frequencies.
74GTLP2033DGGRE4 Features
TSSOP package
48 pin count
48 pins
3.3V power supplies
74GTLP2033DGGRE4 Applications
There are a lot of Texas Instruments 74GTLP2033DGGRE4 voltage translators & level shifters applications.
- I2C / SMBus
- Industrial equipment
- Telecom
- Temperature Ranges (1)
- Product Traceability
- GPIO
- Extended Product-Change Notification
- Industrial Equipment
- Extended Product Life Cycle
- MDIO
