74HC4020PW-Q100J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74HC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HC4020 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Quiescent Current | 8μA |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 14 |
| Trigger Type | Negative Edge |
| fmax-Min | 24 MHz |
| Count Rate | 109MHz |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HC4020PW-Q100J Overview
This device is packaged in a 16-TSSOP (0.173, 4.40mm Width) package. The configuration of this device is based on 16terminations. 5Vis enabled to operate in an extremely flexible manner due to its supply voltage. 1 elements are interconnected in wires. There are 16pins on all components. It is packaged in the way of Tape & Reel (TR). Surface Mountis the way in which it is mounted. In this case, it appears as a member of the family [0]. Due to the fact that it is a member of the 74HCseries, it has a wide range of applications. It is decided to use the logic type [0]. A temperature of -40°C~125°Cshould be set for the operating environment. Using a Surface Mountmounting type, it is mounted. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. It contains 14elements. Among its base part number [0], you will find additional parts that are related. In order for it to operate, it requires a supply voltage of 5V . In the case of the supply voltage (Vsup), it can be as low as 2V. There is 6V maximum supply voltage (Vsup) allowed. As long as 8μAis maintained, it consumes quiescent current.
74HC4020PW-Q100J Features
Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
14 bits per element
Operating supply voltage of 5V
74HC4020PW-Q100J Applications
There are a lot of Nexperia USA Inc. 74HC4020PW-Q100J Counters & Dividers applications.
- MULTIPLICATION
- LINEARIZATION
- Divide-by"N" counters/frequency synthesizers
- Frequency division
- Control counters
- Clocks
- Time delay circuits
- VHF, UHF, FM, AM, etc.
- Communications Digital Frequency Synthesizers;
- Binary counter/decoder
