74HC4852D,112
| Parameters | |
|---|---|
| Channel-to-Channel Matching (ΔRon) | 3 Ω |
| Voltage - Supply, Single (V+) | 2V~6V |
| Signal Current-Max | 0.05A |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 195Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC4852 |
| Pin Count | 16 |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 2μA |
| Propagation Delay | 2.5 ns |
| Turn On Delay Time | 47.5 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Turn-Off Delay Time | 100 ns |
| On-State Resistance (Max) | 195Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 8Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 39ns, 78ns |
74HC4852D,112 Overview
Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. Advanced packaging method Tube is used to provide high reliability. In Surface Mount, this analog switch is mounted. The ratio between the number of multiplexer and demultiplexer circuits is 4:1. Operating temperature extended to -40°C~125°C TA. The total number of terminations is 16. As a result of its 8 channels, this electronic component provides high-quality output. When the electronic component is given a voltage of 3V, it should be turned on and run. A total of 16 pins are injected into the electrical part body. A SP4T switching circuit is used to build these analog multiplexers. The circuits in this analogue multiplexer number 2. Look for analog switch ic variants by searching with 74HC4852. This digital multiplexer has 195Ohm internal resistance. Datasheets for 16 pin functions are available upon request. In this analog multiplexer, the value is Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 6V to the switch device in normal circumstances. The analog switch ic is of the Single supply type and is cost-effective. It is recommended to use 2V as the lowest voltage for the electrical part. The switch device would be able to operate with 2μA current. Using only a single voltage supply, this analog switch requires 2V~6V voltage. This product is integrated with an analog integrated circuit (IC) of type DIFFERENTIAL MULTIPLEXER.
74HC4852D,112 Features
8 Channels
Switch Circuit: SP4T
2μA Supply Current
74HC4852D,112 Applications
There are a lot of Nexperia USA Inc. 74HC4852D,112 Analog Switches & Multiplexers ICs applications.
- Routers
- Sample hold systems
- E1 Network Equipment
- Fiber In The Loop (FITL)
- Communications systems
- Isolation
- High reliability control systems
- Medical
- PCMCIA cards
- Digital cross connects (DSX-1)
