74HC74D-Q100HL
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Supplier Device Package | 14-SO |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74HC |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 2V~6V |
| Frequency | 82MHz |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Clock Frequency | 82MHz |
| Propagation Delay | 37 ns |
| Quiescent Current | 40μA |
| Logic Function | AND, D-Type |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 37ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | 5.2mA |
| Input Capacitance | 3.5pF |
| Low Level Output Current | 5.2mA |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | ROHS3 Compliant |
74HC74D-Q100HL Overview
The flip flop is packaged in 14-SOIC (0.154, 3.90mm Width). You can find it in the Tape & Reel (TR)package. The output it is configured with uses Differential. The trigger configured with it uses Positive Edge. It is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 2V~6V volts. It is operating at -40°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. The FPGA belongs to the Automotive, AEC-Q100, 74HC series. Its output frequency should not exceed 82MHz. D latch consists of 2 elements. As a result, it consumes 40μA of quiescent current without being affected by external factors. The input capacitance of this JK flip flopis 3.5pF farads. It is mounted by the way of Surface Mount. This board has 14 pins. It has a clock edge trigger type of Positive Edge. In order to ensure high efficiency, the supply voltage should remain at 5V. This D latch consumes 40μA quiescent current at all. A 5.2mAvalue is set for the high level output current. Low level output current is set to 5.2mA. It is recommended that the operating temperature be below 125°C. A temperature above -40°Cshould be used for the operation. The minimum voltage required for operation is 2V. The maximum supply voltage supported by the flip flop is 6V. It is possible to achieve 82MHz frequencies.
74HC74D-Q100HL Features
Tape & Reel (TR) package
Automotive, AEC-Q100, 74HC series
14 pins
74HC74D-Q100HL Applications
There are a lot of Nexperia USA Inc. 74HC74D-Q100HL Flip Flops applications.
- EMI reduction circuitry
- Storage registers
- Clock pulse
- Power down protection
- Counters
- Frequency Dividers
- Asynchronous counter
- ESD protection
- Latch-up performance
- Computing
