74HC74N,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Clock Frequency | 82MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | COMPLEMENTARY |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 37ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| RoHS Status | ROHS3 Compliant |
74HC74N,652 Overview
As a result, it is packaged as 14-DIP (0.300, 7.62mm). The package Tubecontains it. T flip flop uses Differentialas the output. JK flip flop uses Positive Edgeas the trigger. It is mounted in the way of Through Hole. The JK flip flop operates at 2V~6Vvolts. The operating temperature is -40°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. The FPGA belongs to the 74HC series. It should not exceed 82MHzin its output frequency. A total of 2 elements are present. There is 40μA quiescent consumption. There are 14 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This D latch belongs to the family of 74HC74. A voltage of 5V is used to power it. A JK flip flop with a 3.5pFfarad input capacitance is used here. The electronic device belongs to the HC/UHfamily. This device has the base part number FF/Latches. Vsup reaches 6V, the maximal supply voltage. Normally, the supply voltage (Vsup) should be kept above 2V.
74HC74N,652 Features
Tube package
74HC series
74HC74N,652 Applications
There are a lot of NXP USA Inc. 74HC74N,652 Flip Flops applications.
- Common Clocks
- Memory
- Single Up Count-Control Line
- ATE
- Safety Clamp
- Count Modes
- Storage Registers
- Digital electronics systems
- Supports Live Insertion
- Pattern generators
