banner_page

74HCT9046AD,112

5V Phase Lock Loop (PLL) 19MHz 74HCT9046A Clock Generators 74HCT Series 16 Pins 16-SOIC (0.154, 3.90mm Width) 16 Terminals Surface Mount 4.5V~5.5V Tube


  • Manufacturer: Nexperia USA Inc.
  • Nocochips NO: 554-74HCT9046AD,112
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 901
  • Description: 5V Phase Lock Loop (PLL) 19MHz 74HCT9046A Clock Generators 74HCT Series 16 Pins 16-SOIC (0.154, 3.90mm Width) 16 Terminals Surface Mount 4.5V~5.5V Tube (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Operating Temperature -40°C~125°C
Packaging Tube
Published 2009
Series 74HCT
JESD-609 Code e4
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Type Phase Lock Loop (PLL)
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number 74HCT9046A
Pin Count 16
Qualification Status Not Qualified
Supply Voltage-Max (Vsup) 5.5V
Supply Voltage-Min (Vsup) 4.5V
Number of Circuits 1
Frequency (Max) 19MHz
Input Clock
Ratio - Input:Output 2:2
PLL Yes
Differential - Input:Output No/No
Length 9.9mm
Width 3.9mm
RoHS Status ROHS3 Compliant

74HCT9046AD,112 Overview


A clock integrated circuit is packaged in a Tube-shaped package because it is for use as a clock. The 16-SOIC (0.154, 3.90mm Width) package contains this clock generator. This clock generator ic can sustain a maximum temperature of 260 during reflowing. In it, there are 16 terminations to be found. This electronic frequency generator requires a voltage of 5V. In this case, Clock is designed to be the input of the clock generator. 1 circuits are implemented to access the electronic component's full performance. A clock-based RF synthesizer that provides a max frequency of 19MHz is available. Because of the Surface Mount, clock PLL can be easily mounted on the panel. The maximum voltage this clock PLL can handle is 5.5V. There should be a voltage supply above 4.5V for this frequency generator in order to ensure its safety. There are 4.5V~5.5V available for use with this clock PLL. Using the test statistics, it is estimated that the ambient temperature should be set to -40°C~125°C. As far as this electronic part is concerned, it can be classified as a Phase Lock Loop (PLL) component. An IC that generates clocks specifically for microprocessors, this clock PLL is 16-bits in si16e. This part number 74HCT9046A is related to the following electrical components. A member of the 74HCT series, this electronic component is made of plastic.

74HCT9046AD,112 Features


Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 5V

74HCT9046AD,112 Applications


There are a lot of Nexperia USA Inc. 74HCT9046AD,112 Clock Generators applications.

  • Walkie-talkies
  • Signal analyzer
  • Media broadcast servers
  • PMR (Professional Mobile Radio)
  • VSAT (Small Ground Satellite Station)
  • Automatic control system test
  • Ports
  • Reference signals to RF systems
  • Electronic countermeasures
  • Frequency Modulation (FM) stereo decoders

Write a review

Note: HTML is not translated!
    Bad           Good