74LCX139MTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LCX |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Decoder/Drivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LCX139 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Number of Elements | 2 |
| Circuit | 1 x 2:4 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Throw Configuration | DP4T |
| Propagation Delay | 7.3 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 7.3 ns |
| Family | LVC/LCX/Z |
| Logic Function | Decoder, Demultiplexer |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Power Supply Current-Max (ICC) | 0.01mA |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LCX139MTR Overview
Digital switch is provided in the 16-SOIC (0.154, 3.90mm Width) for the purpose of saving board space.Tape & Reel (TR) is the packaging method.Digital switch ic adheres to a mounting method of Surface Mount.A digital IC Decoder/Demultiplexer is used as the analog component of the multiplexers.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.Design engineers have more flexibility when digital controlled switch operates at 2V~3.6V voltage.Multiplexers from the 74LCX series can be used in a wide range of applications.There is a design for terminating 16 as part of its basic configuration.There is a base part number 74LCX139 that can be used to locate signal switch's related components as well.For multiplexer's system, 2.7V voltage is supplied.A component pin count of 16 can be found on this turn signal switch.GULL WING is used as the point at which the conductors come to an end as part of this formula.As a type of supply, Single is employed.A configuration of 16 pins is used.The mount is in Surface Mount.The logic switch is included into the family of LVC/LCX/Z.Vsup should be kept at 2V to prevent some unnecessary failures.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.In order for 3.3V to operate normally, a power supply is provided.There are 4 outputs designed to operate the turn signal switch.In electronic terms, the digital switch ic is classified as part number Decoder/Drivers.It consumes 10μA current of multiplexer ic without external influences.A TAPE AND REEL packaging method is used in the switches.In mux switch configuration, there are 2 elements.
74LCX139MTR Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 3.3V
74LCX139MTR Applications
There are a lot of STMicroelectronics 74LCX139MTR Signal Switches / Multiplexers / Decoders applications.
- Decimal decoder
- PCIe
- Textile mills
- Video transmission
- Speed synchronization of multiple motors in industries
- Frequency multiplexing system
- Microprocessor instruction decoding
- Medium scale TV wall
- War field flying robot with a night vision flying camera
- Enabling block of memory depending on address in memory chips
