74LVC16373APVG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 48 |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Operating Supply Voltage | 3.3V |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 6.3 ns |
| Turn On Delay Time | 2.1 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | 24mA |
| Low Level Output Current | 24mA |
| Independent Circuits | 2 |
| Length | 15.9mm |
| Width | 7.5mm |
| Thickness | 2.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74LVC16373APVG Overview
A package called SSOP contains it. Electronic parts with 16 bits are designed for this application. There are 48 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The supply voltage of the device is 3.3V. 48 pins are available on it. It is a member of the LVC/LCX/Z family of electronic devices. The 48 pins are designed into it. This electronic part is mounted in the way of Surface Mount. As far as ports are concerned, this device has 2 ports. Subcategory FF/Latches contains this part. For maximum efficiency, the supply voltage should be set to 3.3V. There is 24mA low level output current set. 24mA is set as the high level output current. Lower than 85°C is the recommended operating temperature. The operating temperature should be higher than -40°C. The supply voltage is limited to 3.6V. With a voltage of 2.7V, it operates at its minimum capacity. A BUS DRIVER logic IC is used.
74LVC16373APVG Features
SSOP package
16 Bits
48 pin count
48 pins
74LVC16373APVG Applications
There are a lot of Integrated Device Technology (IDT) 74LVC16373APVG Latches applications.
- Buffer/Storage Registers
- Timers
- Relay
- Clocks
- Registers
- Pseudo-random code generators
- Automotive ADAS
- Automotive Infotainment
- Watches
- Storage
