74LVC1G139DCUTE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Number of Pins | 8 |
| Weight | 9.610488mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Decoder/Drivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74LVC1G139 |
| Pin Count | 8 |
| Circuit | 1 x 2:4 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Load Capacitance | 50pF |
| Propagation Delay | 16.7 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 16.7 ns |
| Family | LVC/LCX/Z |
| Logic Function | Decoder, Demultiplexer, Demux |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 32mA |
| Supply Type | Single |
| Prop. Delay@Nom-Sup | 5.9 ns |
| Number of Input Lines | 2 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 4 |
| Input Conditioning | STANDARD |
| Height Seated (Max) | 0.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
74LVC1G139DCUTE4 Overview
Due to the lack of space on the board, digital switch is provided in the 8-VFSOP (0.091, 2.30mm Width).As a result, it is packaged in the way of Tape & Reel (TR).Digital switch ic adheres to a mounting method of Surface Mount.the multiplexers uses an analog IC Decoder/Demultiplexer.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.The turn signal switch is designed for use with a 1.65V~5.5V supply voltage, which gives it a lot of flexibility.The multiplexers from 74LVC series can be used for a wide range of applications.Its basic configuration includes terminations in the 8 range.You can also find related parts by using its logic switch base part number of 74LVC1G139.The turn signal switch is supplied with a voltage of 1.8V volts.This turn signal switch has a total of 8 component pins.As a result, conductors end at GULL WING.There is a type of supply of Single.There are 8 pins on it.The mounting point is Surface Mount.The logic switch belongs to the family of LVC/LCX/Z.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.For mux switch's normal operation, power supply 3.3V is provided.In electronic terms, the digital switch ic is classified as Decoder/Drivers.In the absence of external influences, it consumes 10μA current of multiplexer ic.A TAPE AND REEL packaging method is used in the switches.Voltage levels are accepted through 2 input lines of multiplexers.As the signal source, there are 4 output lines.
74LVC1G139DCUTE4 Features
Supplied in the 8-VFSOP (0.091, 2.30mm Width) package
Adopting a supply type of Single
Power supplies of 3.3V
2 input lines
4 output lines
74LVC1G139DCUTE4 Applications
There are a lot of Texas Instruments 74LVC1G139DCUTE4 Signal Switches / Multiplexers / Decoders applications.
- Memory system of computers
- Transmission from the computer system of a satellite
- Code converters
- Injectors
- Analog, digital or video signal switching
- Data bus control
- D/A converters
- Enabling different functions units in microprocessor instruction decoding
- Electronically controlled engine system
- Memory chips
