Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
6-TSSOP, SC-88, SOT-363 |
Number of Pins |
6 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2013 |
Series |
Automotive, AEC-Q100, 74LVC |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
1.5V |
Base Part Number |
74LVC1T45 |
Pin Count |
6 |
Output Type |
Tri-State, Non-Inverted |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.2V |
Number of Ports |
2 |
Number of Bits |
1 |
Propagation Delay |
5.1 ns |
Quiescent Current |
16μA |
Family |
LVC/LCX/Z |
Logic Function |
Transceiver, Translator |
Data Rate |
420Mbps |
Output Characteristics |
3-STATE |
Output Polarity |
TRUE |
Logic IC Type |
BUS TRANSCEIVER |
High Level Output Current |
-32mA |
Channel Type |
Bidirectional |
Low Level Output Current |
32mA |
Translator Type |
Voltage Level |
Voltage - VCCA |
1.2V~5.5V |
Voltage - VCCB |
1.2V~5.5V |
Length |
2mm |
RoHS Status |
ROHS3 Compliant |
74LVC1T45GW-Q100H Overview
Embedded in the 6-TSSOP, SC-88, SOT-363 package, it is now available to you.A Tape & Reel (TR) package is used to package it.This output uses Tri-State, Non-Inverted.This electrical device has a translator type of Voltage Level.A Surface Mount mounting method has been used for this electronic part.Bidirectional is the Channel type of this electrical device.Operation is performed at -40°C~125°C TA.0 terminations are used to end transmission lines.A base part number 74LVC1T45 indicates the related parts.Level translators is powered from a supply voltage of 1.5V.6 pins are present on this board.This is a device from the Automotive, AEC-Q100, 74LVC series.The board has 6 pins.Electronic parts are designed with a number of bits of 1.Voltages up to 5.5V can be supplied.There is a minimum supply voltage of 1.2V for it.1.2V~5.5V is the supply rail configuration on the VCCA.1.2V~5.5V is the configuration of the VCCB supply rail.The way of mounting this electronic part is Surface Mount.1 channels are available.Logic ICs it uses are of the BUS TRANSCEIVER type.Typically, 2 transmission lines are terminated with an impedance-matching device that matches the characteristic impedance of the line.LVC/LCX/Z is the family name of this electronic device.Level translators consumes 16μA of quiescent current wLevel translatorshout being affected by outside factors.
74LVC1T45GW-Q100H Features
6-TSSOP, SC-88, SOT-363 package
6 pin count
Automotive, AEC-Q100, 74LVC series
6 pins
74LVC1T45GW-Q100H Applications
There are a lot of Nexperia USA Inc. 74LVC1T45GW-Q100H voltage translators & level shifters applications.
- One Assembly and Test Site
- Handset
- Controlled Baseline
- Wearable Health and Fitness Devices
- One Fabrication Site
- Debouncing a Mechanical Switch
- Personal computers
- Advanced Driver Assistance System (ADAS)
- Eliminate Slow or Noisy Input Signals
- One Assembly