74LVC74ABQ-Q100X
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-VFQFN Exposed Pad |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 1.2V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Clock Frequency | 250MHz |
| Propagation Delay | 5.2 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 5.2 ns |
| Family | LVC/LCX/Z |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 5.2ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Input Lines | 2 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
74LVC74ABQ-Q100X Overview
The flip flop is packaged in 14-VFQFN Exposed Pad. You can find it in the Tape & Reel (TR)package. As configured, the output uses Differential. There is a trigger configured with Positive Edge. Surface Mountmounts this electrical part. A voltage of 1.2V~3.6Vis used as the supply voltage. Temperature is set to -40°C~125°C TA. This logic flip flop is classified as type D-Type. The FPGA belongs to the 74LVC series. In order for it to function properly, its output frequency should not exceed 250MHz. It has been determined that there have been 14 terminations. You can search similar parts based on 74LVC74. Power is supplied from a voltage of 3.3V volts. This T flip flop has a capacitance of 4pF farads at the input. A device of this type belongs to the family of LVC/LCX/Z. There is an electronic part mounted in the way of Surface Mount. With its 14pins, it is designed to work with most electronic flip flops. Its clock edge trigger type is Positive Edge. It reaches 3.6Vwhen the supply voltage is maximal (Vsup). Currently, there are 2 lines of input. It consumes 10μA of quiescent current without being affected by external factors.
74LVC74ABQ-Q100X Features
Tape & Reel (TR) package
74LVC series
14 pins
74LVC74ABQ-Q100X Applications
There are a lot of Nexperia USA Inc. 74LVC74ABQ-Q100X Flip Flops applications.
- Frequency division
- Power down protection
- Clock pulse
- Instrumentation
- Data transfer
- Storage Registers
- Synchronous counter
- Control circuits
- Consumer
- Parallel data storage
